7
CONNECTION PORT SETTINgS
7-7
Digital Transceiver (D-TRX) screen
Connection Port Settings > Digital Transceiver (D-TRX)
■
Communication Settings
System: NXDN-Trunking
Edit the settings required for calling transceivers from the digital transceiver connected to the RoIP gateway.
1
TalkBack
Select whether or not to enable to talkback from a client transceiver,
when a digital transceiver that is connected to the RoIP gateway has
called to the client transceiver.
(Default: Enable)
When the function is enabled, select the TalkBack time.
(Default: 5)
• Range: 1 ~ 10 (seconds)
2
RX All Call
Select whether or not to permit all Talkgroups to receive a call.
(Default: Disable)
3
Call Type
Select a call type to call from the transceiver, that is connected to the
RoIP gateway, to its client transceiver(s).
(Default: group)
• Options: Individual, group, or All
4
Destination Prefix ID
Enter a destination prefix ID of a client transceiver.
(Default: 1)
• Range: 1 ~ 30
5
Destination ID
Displayed only when the Call Type (
3
) is set to “Individual” or “group.”
Enter an Individual or group ID of the client transceiver.
(Default: 1)
• Range: 1 ~ 2000.
1
2
3
5
4
