![background image](http://html1.mh-extra.com/html/icom/sph-series/sph-series_specification-sheet_3621272011.webp)
www.edmo.com
EDMO Distributors, Inc. Call for Pricing!
1-800-235-3300
www.edmo.com
EDMO Distributors, Inc. Call for Pricing!
1-800-235-3300
11
www.edmo.com
EDMO Distributors, Inc. Call for Pricing!
1-800-235-3300
GSA Test Equipment
GS-07F-5985R
IFF transPOnDEr/IntErrOgatOr tEstEr
The AN/APM-424(V)3 is a small hand-held unit that
accommodates a variety of aircraft to test Transponder
and Interrogator performance. It automatically adjusts both
transmitter power and receiver sensitivity to the test
environment. This permits the operator to assume a
convenient location from 5’ to over 250’ for transponder
testing and 50’ to 1⁄4 mile for interrogator testing.
Tests Mode 1, 2, 3/A, C, 4, 5, IFF, Interrogator,
TCAS and E-TCAS.
aPM-424(V)3 tEstEr
P/N: APm424v3
DC FuEl QuantIty tEstEr
The PSD30-2AF is a DC fuel quantity
tester used on military and commercial
DC systems.
FuEl Qty. tEstEr
P/N: PsD30-2Af
naV/COM sIgnal gEnEratOr
The NAV-2000R is the only generator needed
to test ADF, Marker Beacon, VOR, LOC,
Glideslope, HF, VHF & UHF COMM
receivers. It offers a frequency range of
150 kHz to 450 MHz and is loaded with
special avionic functions.
sIgnal gEnEratOr
P/N: NAv-2000r
transPOnDEr/IntErrOgatOr/DME tEstEr
The SDX 2000 is the first new technology, fully pro-
grammable RF tester that provides complete test capa-
bility for all commercial and military pulsed L-Band
avionics: ATCRBS and Mode-S Transponder (including
data link), DME, TACAN & IFF.
sIgnal gEnEratOr
P/N: sDX2000
arInC 429 Databus analyzEr
The 429EN Data Bus Analyzer provides an
easy method for troubleshooting ARINC 429
labels and has the capability to selectively
trap labels three separate ways. Transmitted
and received data can be viewed in either
hexadecimal or easy-to-understand engi-
neering format.
usED ExtEnsIVEly by us naVy
Databus analyzEr
P/N: 429EN
aC FuEl QuantIty tEstEr
The PSD60-1AF is designed to calibrate and troubleshoot
any AC capacitive fuel, oil or LOX quantity system.
This venerable tester is utilized extensively by rotary and
fixed-wing military aircraft operators around the world.
UH-60, UH-1, C-130, C-5 and CH-67.
FuEl Qty. tEstEr
P/N: PsD60-1Af
aC FuEl QuantIty tEstEr
The PSD60-2R Fuel Quantity Tester is an
accurate, stable unit designed to test AC
capacitance fuel quantity measurement systems
and their line replaceable components. The
PSD60-2R, with the appropriate interface
cable, provides complete capability for testing
most aircraft with AC capacitance fuel systems.
FuEl Qty. tEstEr
P/N: PsD60-2r
aC/DC FuEl QuantIty tEstEr
The PSD90-1C AC/DC Capacitance Tester
will test any AC/DC Capacitive Fuel, Water,
LOX or Engine Oil Quantity System. It
has new features that allow the user to better
troubleshoot and isolate fuel system problems.
Rugged in design, the unit can be used
anywhere troubleshooting is required.
FuEl Qty. tEstEr
P/N: PsD90-1c
P/N: PsD90-1m
IFF transPOnDEr raMP tEstEr
The IFF-701TI with TCAS is an organizational
level 1st line, portable battery operated tester
for testing IFF transponders installed in
airborne, naval or land based platforms.
It provides a comprehensive AUTO TEST
function which allows the operator to verify
and certify the operation of MK10A, MK12,
MK/Mode-S IFF transponders. The IFF-701-
TI contains TCAS, ETCAS & Interrogator
test functions as well.
Currently in use by
the Army TUAV Program.
IFF tEstEr
P/N: 701TI-110
glObal POsItIOnIng sIMulatOr
The IFR GPS-101 provides accurate and repeatable
testing of GPS receivers. It achieves this testing capability
by simulating a Global Positioning Satellite and generating
a specific Satellite Vehicle & Navigation data pattern.
Coupled with remotely loaded GPS almanac information &
RF levels/frequency control, the GPS-101 provides a por-
table test solution for verifying the operational integrity
of GPS systems.
gPs sIMulatOr
P/N: 101-110-c
MICrOWaVE lanDIng systEM raMP tEstEr
The MLS-801 ramp tester provides go/no-go verification of
the Microwave Landing System angle receiver installed in an
aircraft. This tester generates a single channel signal that
includes all necessary AM and DPSK modulation for testing
of the azimuth, elevation, clearance functions...and more!
Mls tEstEr
P/N: mls-801
aVIOnICs sIgnal gEnEratOr
The Nav-750C provides internal generation of
waveforms suitable for testing VOR, ILS, Marker
Beacons & SELCAL radio receivers. With a
frequency range of 100 KHz to 1.35 GHz,
it also covers the RF range for full ADF and
VHF/UHF, AM/FM COMM testing. Avionics
parameters are presented in the same form
as described in the ICAO standards. This unit
offers an ideal single instrument solution
for the testing of avionics receivers, transceiv-
ers and NAV systems. The use of Direct Digital
Synthesis techniques ensures excellent accuracy
and stable performance under all operating
conditions.
sIgnal tEstEr
P/N: NAv-750c
aErOFlEx IFr 4000
The IFR 4000 is a compact, lightweight and waterproof
unit designed for testing ILS, VOR Marker Beacon and
VHF/UHF Communications avionics systems.
aErOFlEx IFr 6000
The All-New IFR 6000 features an extremely easy to use interface
with the added Transponder Modes A/C/S and DME. Also, the
TCAS/TIS and ADS-B options have been added to make the IFR
6000 a complete package that replaces the ATC-600A, ATC-601
and the TCAS-201. Approx. 8 lbs.
transPOnDEr / DME /
tCas tEst sEt
P/N: 6000-110
naV COMM tEst sEt
P/N: 4000-110
all ItEMs lIstED On EDMO gsa sCHEDulE
# gs-07F-5985r