Icom MR-1220 Series Instruction Manual Download Page 44

Page: 44 / 80

MENU SCREEN

Menu items

■

Target

Vector Mode Setting

Selects the vector (speed and bearing) reference of

the target.

•

True:

Displays the vector of your vessel and the

AIS/ARPA targets in true motion.

•

Relative: Displays the vector of the AIS/ARPA

targets in relative motion. Your own vessel

is not displayed.

Vector Time

Sets the vector time of your vessel and AIS/ARPA

targets to 30 seconds, 1 minute, 3 minutes, 6 minutes,

15 minutes, or 30 minutes.

Track Interval

Sets the interval for reloading the track of your own

vessel and AIS/ARPA targets to 15 sec, 30 sec, or 1

~15 minutes in 1 minute steps.

CPA Limit

Sets the Closest Point of Approach (CPA) limit by

distance.

Range: 0.1 ~ 12. 0 (NM), 0.2 ~ 22.2 (km), or 0.1 ~

13.8 (SM).

The distance unit varies, depending on the “Unit

(Distance)” setting in the Initial menu.

The settable range differs, depending on the scanner unit

type.

TCPA Limit

Sets the Time to Closest Point of Approach (CPA) limit

to 30 seconds, 1, 2, 3, 4, 5, 6, or 12 minutes.

TIP:

CPA and TCPA are set to give a warning when

a target or targets enter those limits around your own

vessel.

CPA/TCPA Alarm Function

Sets whether or not to sound an alarm when a target

enters CPA and TCPA limits.

Display Favorite Target

Sets whether or not to alert when a target enters the

set range in the “Range (Favorite Target)” below.

Range (Favorite Target)

Sets the range of the distance at which notice when a

vessel listed in your Favorite Target List enters.

•

∞: Displays all range from your vessel.

•

0.1 ~ 36.0 (NM), 0.2 ~ 66.7 (km), or 0.1 ~ 41.4 (SM):

Sets the distance from your vessel by 0.1 steps.

The distance unit varies, depending on the “Unit

(Distance)” setting in the Initial menu.

The settable range differs, depending on the scanner unit

type.

Favorite Target List

You can enter up to 10 of Favorite targets.

ID Blocking Function

Set whether or not to individually exclude the targets

that are set in the “Blocking Target List” below from

sounding an AIS or CPA/TCPA collision alarm.

Blocking Target List

You can enter up to 10 of Blocking targets.

■

ARPA

See the Simplified ARPA operation section (pp. 29

~ 32).

■

AIS

See the AIS operation section (pp.23 ~ 28).

Summary of Contents for MR-1220 Series

















































































Search results

Summary of Contents for MR-1220 Series

Reviews:

Related manuals for MR-1220 Series

Brands by name

Popular brands

Icom MR-1220 Series, Instruction Manual

Search results

Summary of Contents for MR-1220 Series

Reviews:

Related manuals for MR-1220 Series

Brands by name

Popular brands