Icom MA-510TR, Instruction Manual

Page: 26 / 64

17
5
BASIC OPERATION
D
Target/Friends list screen
The Target list screen displays all AIS
targets that the transponder detects.
The Friends list screen displays the AIS
targets that you set as a Friend, and that
the transponder detects. (p. 18)
The AIS target data is sorted by the
distance from your vessel, and the closest
target is located at the top of the list.
1
2
1
2
1
THE NUMBER OF TARGETS
Displays the number of AIS targets that
the transponder detects.
2
TARGET INFORMATION
Displays the following AIS target
information.
•Target icon
L
“A” or “B” is also displayed next to ,
depending on the vessel class.
•MMSI code or name
L
When a Friend is detected, is
displayed on the Target list.
•Range (RNG) from your vessel to the
target (unit: NM or km)
•Bearing (BRG) from your vessel to the
target (unit: degree)
D
Danger list screen
The Danger list screen displays any
Danger target whose CPA (Closest Point
of Approach) distance and TCPA (Time to
CPA) time are less than the set values. You
can set the values in “CPA” and “TCPA” on
the Menu screen. (p. 21)
[MENU] > AIS settings > CPA/TCPA >
CPA/TCPA
The Danger target data is sorted by CPA
or TCPA.
• Push [◄] to sort the AIS target data by
CPA.
• Push [►] to sort the AIS target data by
TCPA.
1
2
1
THE NUMBER OF TARGETS
Displays the number of AIS targets that
the transponder detects.
2
DANGER TARGET INFORMATION
Displays the following AIS target
information.
•Target icon
L
“A” or “B” is also displayed next to ,
depending on the vessel class.
•MMSI code or name
L
When a Friend is detected, is
displayed on the Danger list.
•CPA: Closest Point of Approach
(unit: NM or km)
•TCPA: Time to CPA (unit: minute)