![background image](http://html1.mh-extra.com/html/icom/im710/im710_instruction-manual_2038204006.webp)
3
PANEL DESCRIPTION
2
■
Front panel (Continued)
!1
KEYPAD
• Enters the selected channel number (or fre-
quency) for direct channel selection. (p. 7)
• Stores a receive frequency into a user chan-
nel or ITU simplex channel when:
- pushing [CE] (“
►
” appears)
- entering the desired frequency via the key-
pad
- pushing and holding [RX] (p. 12)
• Adjusts the RF gain after pushing [FUNC] to
reduce the receiver sensivity. (p. 10)
• Stores a transmit frequency into a user chan-
nel (except General version) when:
- pushing [TX] (“
$
” blinks)
- pushing [CE] (“
►
” appears)
- entering the desired frequency via the key-
pad
- pushing and holding [TX] (p. 12)
• Selects the transmit output power after push-
ing [FUNC]. (p. 9)
• Toggles the channel number input or fre-
quency input. (p. 8)
- “
►
” appears when frequency input is se-
lected.
- The channel selector and keypad changes
the frequency while “
►
” appears.
• Clears the entered digit and retrieves the pre-
vious channel (or frequency) while entering
numbers. (p. 7)
• Enters the name programming condition after
pushing [FUNC] for changing the channel
name. (p. 12)
• Toggles the channel or frequency indications.
(p. 6)
• Enters “–” for ITU simplex channels. (p. 7)
• Enter channel number with up to 4 or 5 digits
when “
►
” does not appear. (p. 7)
• Enter the frequency with up to 6 digits when
“
►
” appears. (p. 8)
CE
RX
TX
−
CH/FREQ
1
0
to
MICROPHONE
POWER
VOLUME
TX FREQ
2182KHz
RESET
MODE
TUNE
SSB RADIO TELEPHONE
AGC
SQL
CLARITY
N B
SPEAKER
[ALARM] [TX FREQ]
+
FOR ALARM TX
DIMMER
GROUP
CHANNEL
1
2
3
4
5
6
7
8
9
CE
RX
TX
0
CH/F/REQ
iM 710
FUNC
–
q
w
e r
t
y
u
i
!0
o
!1
!2
!3
!4
!5
!6
!7
This function is not installed
in the IC-M710.