![background image](http://html1.mh-extra.com/html/icom/im423/im423_instruction-manual_4301608030.webp)
21
7
DSC OPERATION
Programming Group ID
D
Enter “GROUP ID” in the DSC SETTINGS menu.
q
Push [ADD].
w
• The “GROUP ID” program screen is displayed.
Enter a desired group ID in the following way:
e
• Select a desired number using Dial, or [
Y
]/[
Z
]/[
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
The first digit is fixed as ‘0’ for a Group ID.
The first two digits are ‘0’ for any Coast station ID.
Repeat step
r
e
to input the specific 9 digits group code.
After entering the 9 digit code, push [ENT] or Dial to set it.
t
• The Group ID name programming screen is displayed.
Enter a desired 10 digit ID name in the following way:
y
• Select a desired character using Dial, or [
Y
]/[
Z
]/[
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
• Push [123], [!$?] or [ABC] to select a character group.
After entering the ID name, select “FINISH” using Dial, or
u
[
Y
]/[
Z
]/[
Ω
]/[
≈
], then push [ENT] or Dial to program it.
• The “GROUP ID” list screen is displayed.
Push [MENU] to exit the MENU screen.
i
MENU
➪
DSC Settings
➪
Group ID
(Push [MENU]) (Rotate Dial, then push [ENT].)
Summary of Contents for iM423
Page 98: ...89 10 CONNECTIONS AND MAINTENANCE Gasket Mounting base Cap Nut...
Page 104: ......
Page 105: ...MEMO...
Page 106: ...MEMO...