background image

7

4

BASIC OPERATION

3

4

Channel selection

IMPORTANT!:

Prior to using the transceiver for the first

time, the battery pack must be fully charged for optimum
life and operation. To avoid damage to the transceiver, turn
the power OFF while charging.

D

Channel 16

Channel 16 (Distress channel) is used for establishing initial
contact with another station and for emergency communica-
tions. While standing by, you must monitor Channel 16.

q

Push [16] to select Channel 16.

w

Push [CH] to return to the condition before selecting Chan-
nel 16, or push [

Y

]/[

Z

] to select the operating channel.

D

Channel 9 (Call channel)

Channel 9 is the leisure-use call channel. The call channels
can be re-programmed (p. 9) and may be used to store your
most often used channels for quick recall.

q

Push [CALL] to select the call channel.

• “CALL” and the call channel number appear.
• Call channel can be re-programmed. See the “Call channel

programming” on p. 9 for details.

w

Push [CH] to return to the condition before selecting Chan-
nel 9 (call channel), or push [

Y

]/[

Z

] to select the operating

channel.

Push

Push

Summary of Contents for iGM1600






























Reviews: