![background image](http://html1.mh-extra.com/html/icom/if9011s/if9011s_instruction-manual_4292905019.webp)
14
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
User set mode
The user set mode is accessed at power ON and allows you
to set seldom-changed settings. You can “customize” the trans-
ceiver operation to suit your preferences and operating style.
Entering the user set mode:
q
While pushing and holding [I] and
[II], rotate [VOL] to turn the power
ON.
• Turn power OFF in advance.
• “SET MODE” appears for 1 sec at
power ON.
w
Push and hold [
Ω
] to enter user
set mode.
e
Push [
Ω
] several times to select
the appropriate item.
Then push [
∫
] or [
√
] to set the
desired level/condition.
• Available set mode functions are
Backlight
,
LCD contrast
,
Beep
,
Beep Level
,
Ringer Level
,
SQL
Level
,
AF Min Level
,
Mic Gain
,
VOX Gain
*,
VOX Delay
*,
Horn
,
Battery Voltage
,
Signal Moni
and
System info
.
* Appears only when the external
VOX unit is connected. The VOX
unit is available in the near future.
r
Push and hold [
Ω
] again to exit
the user set mode.
• Until turning power OFF, [
Ω
], [
∫
] and [
√
] is not activated as the
assigned key function.
NOTE:
While in the user set mode, [
Ω
], [
∫
] and [
√
] are
activated as described above regardless of the assigned
key function.
User set mode is also available using a programmable key.
Please refer to p. 9 [User Set Mode] section for instructions
regarding using the key assigned for user set mode.
[VOL]
[I]/[II]
[
Ω
]
[
Ω
]
[
∫
]/[
√
]