Icom iF5061, Instruction Manual, Page: 17 / 24

14
2
BASIC OPERATION
2
■
User set mode
User set mode is accessed with [User Set Mode] and allows
you to set seldom-changed settings. In this case you can
“customize” the transceiver operation to suit your preferences
and operating style.
Entering the user set mode:
q
While pushing and holding [P1] and [P2], push [ ] to turn
the power ON. Then, push and hold [P0] for 1 sec. to enter
user set mode.
• You should hold [P1] and [P2] until “SET MODE” appears.
w
Push [P0] several times to select the appropriate item.
Then, push [Up] or [Down] to set the desired level/condi-
tion.
• Available set mode functions are Backlight , LCD Contrast ,
Beep , Beep Level , Ringer Level , SQL Level , AF Min Level ,
Mic Gain , Horn and Signal Moni .
e
Push and hold [ ] for 1 sec. to turn power OFF, then ON
again to exit set mode.
User set mode is also available via a programmable key.
Please refer to p. 6 [User Set Mode] section.
[ ]
[P0] [Up]/[Down]
[P1] [P0] [P2] [ ]
IC-F5061_F6061_0.qxd 07.4.9 0:59 PM Page 14 (1,1)