4
NXDN
™
OPERATION
4-3
Receiving a Call Alert
D
When a Call Alert is received:
q
• The transceiver will automatically transmit the acknowledge
-
ment.
• The status indicator blinks orange.
• Beeps sound.
Hold down [PTT], then speak into the microphone.
w
Release [PTT] to receive a response.
e
NOTE:
The status indicator or Beeps may differ, de-
pending on the presetting.
Receiving a Stun, Kill or Revive
D
If an individual call with Stun or Kill command is re-
ceived (RAN code matching is not necessary depend-
ing on the presetting), the transceiver will automatically
transmit the acknowledgement, and then you cannot
receive* or transmit.
* Depending on the received Stun command setting.
When a Stun command is received:
➥
• The transceiver cannot be operated until the individual
call with Revive command is received (RAN code match-
ing is not necessary depending on the presetting) or until
the data cloning is performed.
• Even if [ROTARY SELECTOR] is changed, the transceiv
-
er will keep the same channel as the Stun command is
received.
When a Kill command is received:
➥
• The status indicator alternately blinks red and green.
• The transceiver cannot be operated until data cloning is
performed.
NOTE:
Depending on the presetting, the transceiver
can ignore the Stun, Revive and Kill commands,
which are from a non-specified station.
Receiving a call
Receiving a Remote Monitor or Radio
D
Check Call
If an individual call with Remote monitor or Radio check
command is received (RAN code matching may not be
necessary, depending on the presetting), the transceiv-
er will automatically transmit.
When a Remote monitor command is received:
➥
• The transceiver will automatically transmit the acknowl
-
edgement, and then it transmits the microphone audio for
the preset time period.
When a Radio check command is received:
➥
• The transceiver will automatically transmit the acknowl
-
edgement.