![background image](http://html1.mh-extra.com/html/icom/if3061s/if3061s_instruction-manual_2038191027.webp)
23
7
BATTERY CASE
7
6
■
Optional battery case (BP-240)
When using the optional battery case attached to the trans-
ceiver, install 6
×
AAA (LR03) size alkaline batteries as illus-
trated at right.
q
Unhook the battery cover release hook (
q
), and open the
cover in the direction of the arrow (
w
). (Fig.1)
w
Then, install 6
×
AAA (LR03) size alkaline batteries. (Fig.2)
• Install the alkaline batteries only.
• Be sure to observe the correct polarity.
• Do not pin the ribbon under the batteries.
e
Fit the cover in the direction of the arrow (
e
), then close
(
r
). And hook the battery cover release hook until it
makes a ‘click’ sound (
t
). (Fig.3)
CAUTION:
• When installing batteries, make sure they are all the same
brand, type and capacity. Also, do not mix new and old
batteries together.
• Keep battery contacts clean. It’s a good idea to clean bat-
tery terminals once a week.
• Never incinerate used battery cells since internal battery
gas may cause them to rupture.
• Never expose a detached battery case to water. If the bat-
tery case gets wet, be sure to wipe it dry before using it.
NOTE: When the optional battery case is attached, the
battery type must be selected to “DRY BATT” when turn-
ing the transceiver ON. ((
☞
p. 10))
q
BP-240
w
Fig.1
Fig.2
Fig.3
e
r
t