1
1
PANEL DESCRIPTION
■
Front panel
D
Factory default key assignment
[Upper]
Push to make a Smart-Ring call.
Hold down to make a Call-Ring call.
See the next page for more detail.
[Lower]
Hold down to release the C.Tone* mute. The
mute is released even if the received signal does
not include a matching C.Tone*.
[Top]
Push to toggle the operating Zone.
Each time the user pushes this key, the
transceiver selects Zone 1, Zone 2, and then
Zone 1 again.
* CTCSS tone or DTCS code
D
About the LED Indicator
• Lights red while transmitting.
• Lights green while receiving a signal.
• You should charge the battery when the indicator slowly
blinks green.
• You must charge the battery when the indicator blinks
green fast.
Speaker
Microphone
[PTT]
LED indicator
Antenna
[Upper]
(Dealer assignable)
[Lower]
(Dealer assignable)
D
About the Speaker microphone jack
CAUTION:
The transceiver meets IP67 requirements for
dust-tight and waterproof protection only when the jack
cover or the optional HM-168LWP, HS-94LWP, or
HS-95LWP is attached.
■
Turning ON the power
For optimum life and operation, the battery must be fully
charged before using the transceiver for the first time.
➥
Rotate [VOL] to turn ON the power.
[Rotary Selector]
[VOL]
Speaker-
Microphone
jack
[Top]
(Dealer assignable)
