![background image](http://html1.mh-extra.com/html/icom/idas-f3201dex-14/idas-f3201dex-14_operating-instructions-manual_4268597017.webp)
3
BASIC OPERATION
3-4
Call procedure
When your system employs tone signalling (excluding
CTCSS and DTCS), the tone call procedure may be
necessary prior to voice transmission. The tone signal-
ling that is employed in the transceiver may be a selec-
tive calling system, which allows you to call only spe-
cific station(s), and prevents unwanted stations from
contacting you.
Select a desired TX code channel or 2/5-tone code,
q
according to your System Operator’s instructions.
• This may not be necessary, depending on the program
-
ming.
Push [Call] (assigned to [Upper], [Lower] or [Emer]).
w
(p. 2-6)
After transmitting a 2/5-tone code, the remainder of
e
your communication can be carried out normally.
Selective calling
Non-selective calling