Icom ID
–800H Mini–Operating Guide by W5JCK, September 2007
Page 4 of 6
Operating in Memory Mode
● If necessary, press
[
M/CALL●PRIO
]
to activate Memory mode.
● To change the Memory channel, rotate
[
DIAL
]
.
● To start a scan, press and hold
[
V/MHz●SCAN
]
for 1 second.
● To stop a scan, press
[
V/MHz●SCAN
]
.
Alternatively:
See “Using the HM-133 Microphone” section for instructions
on using the microphone
▲/▼ and/
or keypad buttons
to perform these
operations.
Memory Bank Selection
The ID-800H has 10 Memory Banks (A to J), each of which can contain up
to 500 Memory channels. To select a Memory channel within a Bank:
1. If necessary, press
[
M/CALL●PRIO
]
to activate Memory mode.
2. Press
[
BAND●MODE
]
one or more times to activate the Memory Bank
selection. (The Bank initial blinks on the LCD display.)
3. Rotate
[
DIAL
]
to display the desired Memory Bank.
4. Press
[
BAND●MODE
]
to select the Memory Bank. (The Bank initial
stops blinking.)
5. Rotate the
Dial
to select a Memory channel within the bank.
To return to regular Memory mode, Press
[
BAND●MODE
]
twice.
Using the Monitor Function
This function is used to listen to weak signals
without disturbing the squelch setting.
● To activate, press
[
MONI●DTMF
]
to open the
squelch. (The
“Busy” icon blinks on the LCD
display`.)
● To cancel, press
[
MONI●DTMF
]
again.
Alternatively:
Press the HM-133 microphone
button
[
BANK●MONI●1
]
to activate or cancel the
Monitor function.
Selecting the Call Channel
Call channel is a pre-programmed Memory channel
accessed by pressing the Call channel button.
1. Press
[
M/CALL●PRIO
]
one or more times to
activate Call Channel mode.
2. Press
[
BAND●MODE
]
to select the desired call
channel.
(In Memory mode, the “C1” or “C2”
icon blin
ks. In VFO mode, the “c” icon blinks.)
3. To cancel Call Channel mode:
● To return to Memory mode, press
[
M/CALL●PRIO
]
one or more times.
● To return to VFO mode, press
[
V/MHz●SCAN
]
.
Alternatively:
Press and hold the HM-133
microphone button
[
MR●CALL
]
for 1 sec.
to
activate the Call Channel mode, then press
[
BAND●MODE
]
to select the desired call channel in
the main Band.To cancel, press
[
MR●CALL
]
to
return to Memory mode, or press
[
VFO/LOCK
]
to
return to VFO mode.
