INTRODUCTION
44
D-ST
AR GUIDE
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
NOTE:
•Using the repeater list is required to use the DR function. (p. 66)
•Before operating in the Duplex mode,
BE SURE
to check whether the repeater is busy,
or not. If the repeater is busy, wait until it is clear, or ask for a ‛break’ using a method
acceptable to your local procedures.
•The transceiver has the Time-Out Timer function for the DV Repeater operation. The timer
limits a continuous transmission. Warning beeps will sound approximately 30 seconds
before timeout and then again immediately before the time-out.
Local Area call
Access
repeater
Area 1
repeater
Area 1
Area 1
Area 2
Gateway call
Simplex call
Area 1
repeater
Area 2
repeater
