9
MEMORY OPERATION
9-12
Selecting a memory name display
While in the memory mode, the entered memory
name can be displayed in different styles� You can
select a display type�
Example:
Selecting “Name (Large)” in the Single
band display�
1� Push [MR] to select the Memory mode�
L
For only the ID-52A, pushing [MR] each time selects
the Memory and Weather Channel modes�
2� Push [QUICK]�
3� Select “Display Type�”
4� Select a display type�
L
“Freq (Name OFF)” is set as the default�
TIP:
There are 5 types of Memory name displays�
•
Freq (Name OFF):
Displays only the frequency�
•
Freq (Normal Name):
Displays the large font sized frequency and small font
sized Memory name�
L
In the Dual band display, select “Freq�”
•
Freq (Large Name):
Displays the large font sized frequency and large font
sized Memory name�
L
You cannot select in the Dual band display�
•
Name (Normal):
Displays the small font sized Memory name and small
font sized frequency�
•
Name (Large):
Displays the large font sized Memory name and small
font sized frequency�