New2001
3
2
PANEL DESCRIPTION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
Front, top and side panels
q
PTT SWITCH [PTT]
Hold down to transmit, release to receive. (p. 19)
w
ANTENNA CONNECTOR
Connect the antenna here.
(p. 1)
e
CONTROL DIAL [VOL]
➥
Adjust the volume level. (p. 15)
➥
During the Set mode, or Initial Set mode, rotate to se-
lect a desired option or value. (pp. 39, 44)
r
EXTERNAL SPEAKER/MICROPHONE JACKS [SP MIC]
Used to connect an optional speaker-microphone, plug
adapter cable or cloning cable. The internal microphone
and speaker will not function when an option is connected.
See page 53 for a list of available options.
Be sure to turn OFF the transceiver power before con-
necting or disconnecting optional equipment to or from
the
[SP MIC] jack.
t
MONITOR KEY [MONI]
➥
Hold down to temporarily open the squelch to monitor
the operating frequency. (p. 15)
➥
While holding down this key, push
[
p
] or [
q
] to adjust
the squelch level. (p. 15)
➥
Enters or sends the DTMF code ‘A.’ (pp. 36, 37)
q
w
e
r
t
y
u
i
Function
display (pp. 6, 7)
Keypad
(pp. 4, 5)
Microphone
Speaker