![background image](http://html1.mh-extra.com/html/icom/ic-t81/ic-t81_instruction-manual_2038088028.webp)
24
8
SCAN FUNCTIONS
■
Skip channel setting
Memory channels can be set to be skipped during memory
scan. This is useful to speedup the memory scan interval.
➀
Push [MR] to select memory mode.
➁
Push [
(MR)
MW] for 1 sec. to enter memory write mode.
➂
Rotate [DIAL] (or push [MULTI(
↔
)]) to select a memory
channel.
➃
Push [MULTI(
↕
)] twice times to select “SKIP.”
➄
Push [MULTI(
↔
)] (or rotate [DIAL])
to toggle the skip setting for the se-
lected channel ON/OFF.
• “SKIP” appears when the channel is
set as a skip channel.
➅
Push [VFO] to program the setting
and exit memory write mode.
☞
NOTE:
Scan edge channels, 0A to 9B, cannot be set to
show “SKIP” settings, however, they will be skipped dur-
ing scan.
SKIP
MR
MR
■
Scan resume
condition
The resume condition can be selected as a pause or timer
scan. This setting is common for all scans.
USING
SET MODE
Pause
scan
Receiving
a signal
Timer
scan
10 sec.
2 sec.
When receiving a signal, pause
scan pauses until the signal dis-
appears; timer scan pauses for
10 sec.
➀
Push [MULTI] for 1 sec. to enter set
mode.
➁
Push [MULTI(
↕
)] one or more times
until “SC” appears.
➂
Push [MULTI(
↔
)] (or rotate [DIAL])
to select the desired scan resume
condition.
• “T-10”: scan pauses for 10 sec. on a
received signal.
• “P-02”: scan pauses on a received signal until it disappears.
➃
Push [VFO] to exit set mode.
IC-T81A/E Manual-(1) 01.12.5 6:56 PM Page 24 (1,1)