![background image](http://html1.mh-extra.com/html/icom/ic-t7h/ic-t7h_service-manual_2038087006.webp)
SECTION 3
DISASSEMBLY INSTRUCTIONS
3 - 1
•
DISASSEMBLING PANELS
1
Unscrew 4 screws,
A
from the rear panel and 2 screws,
B
from the rear plate to separate front and rear panels.
2
Unscrew 4 screws,
C
from the rear plate to remove it.
•
REMOVING LOGIC UNIT
1
Unscrew 4 screws,
D
from the LOGIC Unit.
2
Unsolder jumper wires from the speaker as shown below.
•
REMOVING 2F UNIT
1
Unscrew 1 screw,
E
from the 2F unit.
2
Unsolder the point,
F
, then remove the 2F unit with the
contact base.
(Disconnect J1 on reverse side of the 2F unit to remove).
Rear panel
C
Front panel
Rear panel
A
A
B
C
Ground lug
Front panel
Speaker
LOGIC unit
Unsolder
D
D
2F unit
F
E
Rear panel
Contact base
J1
•
REMOVING 1F UNIT
1
Pull the 2 knobs off and then unscrew the nut.
2
Unscrew 3 screws,
G
and 2 screws,
H
from the 1F unit.
3
Unsolder 2 points,
I
then remove the 1F unit.
Ground lug
Knob
1F unit
Nut
I
H
G
Rear panel