6
OTHER FUNCTIONS
6-10
Using the Simple MIC function
The Simple MIC function enables controlling the
transceiver through your control unit attached to the
[SP] jack.
NOTE: BE SURE
to turn OFF the transceiver when
plugging or unplugging the headset into or from the
[SP] jack.
+
‒
2.7k
Ω
6.8k
Ω
15k
Ω
33k
Ω
S1
S2
S3
S4
Remote control unit
To the
[
SP
]
jack
GND
SP
REMOTE
Rated input
:
700 mW
(
8
Ω
)
or more
External speaker
3.5
(
d
)
mm
• SImPLE
S1
Selects a Call channel.
S2
Turns the Monitor function ON or OFF.
S3
Selects memory channel 0.
S4
Selects memory channel 1.
• nORm-1
S1
Toggles between the VFO mode and
Memory mode.
S2
Selects a Call channel.
S3
Frequency or memory channel “UP.”
S4
Frequency or memory channel “DOWN.”
• nORm-2
S1
Toggles between the VFO mode and
Memory mode.
S2
Turns the Monitor function ON or OFF.
S3
Frequency or memory channel “UP.”
S4
Frequency or memory channel “DOWN.”
•
Common (SImPLE, nORm-1, nORm-2)
S2
Transmits t-CALL (1750 Hz tone) while
holding down [PTT].
S3
Enters the Squelch adjustment mode while
using the Monitor function.
S4
Enters the Squelch adjustment mode while
using the Monitor function.