20
5
MEMORY CHANNELS
■
Channel/bank names
Channel names of up to 8 characters and bank
names of up to 5 characters can be programmed for
convenience. Programmed names can be easily cop-
ied to other channels using the copy/paste function.
q
Select the desired memory channel.
w
Set the frequency (and mode/tuning steps), then
push and hold the [MW] key.
• When no data is programmed, “
BLANK
” appears and
memory names cannot be programmed.
e
Push [
CE
≈
• NAME].
• A cursor appears at the first character space of the
name area.
r
Enter the desired name via the keypad.
• Push the appropriate keys to input the desired charac-
ters.
• To erase a character, overwrite with a ‘space’ using the
[
M-CH
•
] key.
• To move the cursor forwards or backwards, use the [•
Ω
]
or [CE
≈
] key.
t
Push [ENT] to input the set name.
q
Select the desired bank using [
M-CH
• BANK
▲
] or
[
ENT
• BANK
▼
].
w
Push [
CE
≈
• NAME].
• A cursor appears at the first character space of the
name area.
• When no data is programmed, (“
BLANK
” appears)
the cursor does not appear. Program a frequency or
change the channel in such cases.
e
Push [•
Ω
] to move the cursor to the bank name
area.
r
Enter the desired name via the keypad.
• Use the same method as for channel names (see
above).
t
Push [ENT] to input the set name.
NOTE:
When using [
CE
≈
] on the last digit of the
bank name, the current name is cleared and the
previous one is substituted. DO NOT forget to
push [ENT] after the bank name is set.
[
CE
≈
• NAME] key
1
QZ
ENT
BANK
ENT
WXY
9
NAME
CE
to
USR-A
USR-A
USR-A
MEMONAME
USR-A
MEMONAME
D
Channel name programming
D
Bank name programming
USR-A
USR-A
USR-A
MEMONAME
MEMONAME
MEMONAME
BANKN
MEMONAME
BANKN
MEMONAME
ENT
BANK
ENT
.
NAME
CE
5 times
1
QZ
WXY
9
to