![background image](http://html1.mh-extra.com/html/icom/ic-r20/ic-r20_service-manual_3569421049.webp)
INTRODUCTION
DANGER
This service manual describes the latest service information
for the
IC-R20
COMMUNICATIONS RECEIVER at the time
of publication.
This service manual covers each versions.
MODEL
IC-R20
VERSION
[USA], [EXP-01],
[CAN]
[EUR], [EXP-02]
[UK], [SEA]
AC adapter
BC-149A
BC-149D
–
ORDERING PARTS
Be sure to include the following four points when ordering
replacement parts:
1. 10-digit order numbers
2. Component part number and name
3. Equipment model name and unit name
4. Quantity required
<
SAMPLE ORDER
>
1110003200
S.IC
TA31136FN
IC-R20 RF UNIT
5 pieces
8930062430
Key
2699 Keyboard
IC-R20 Chassis
12 pieces
Addresses are provided on the inside back cover for your
convenience.
NEVER
connect the receiver to an AC outlet or to an exter-
nal DC power supply that uses more than 6.3 V. This will ruin
the receiver.
DO NOT
expose the receiver to rain, snow or any liquids.
DO NOT
reverse the polarities of the power supply when
connecting the receiver.
DO NOT
apply an RF signal of more than 20 dBm (100
mW)
to the antenna connector. This could damage the receiver’s
front end.
REPAIR NOTES
1. Make sure a problem is internal before disassembling the receiver.
2.
DO NOT
open the receiver until the receiver is disconnected from its power source.
3.
DO NOT
force any of the variable components. Turn them slowly and smoothly.
4.
DO NOT
short any circuits or electronic parts. An insulated turning tool
MUST
be used for all adjustments.
5.
DO NOT
keep power ON for a long time when the receiver is defective.
6.
READ
the instructions of test equipment thoroughly before connecting equipment to the receiver.
To upgrade quality, any electrical or mechanical parts and
internal circuits are subject to change without notice or
obligation.
Icom, Icom Inc. and
are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom,
Germany, France, Spain, Russia and/or other countries.