Icom IC-R1500, Instruction Manual

Page: 24 / 56

19
5
MEMORY OPERATION
D D
To indicate the channel name
[
The channel name indication can be set for independent
memory channels.
q
Select the desired memory channel.
➥
Push [MR•SKIP] to select memory mode, then rotate
[DIAL] to select the desired memory channel.
• “
!
” and memory channel number appear.
w
Push [SET•LOCK] to enter set mode.
e
Push [SET•LOCK] or [S.MW•MW] several times to select
“Anm” item.
r
Rotate [DIAL] to turn the memory name indication ON.
t
Push [TS•MODE] to exit set mode.
NOTE: When no memory name is programmed, the stored
frequency is displayed.
■
Copying memory contents
This function transfers a memory channel’s contents to VFO
(or another memory channel). This is useful when searching
for signals around a memory channel frequency and for re-
calling the subaudible tone frequency etc.
D
Memory
➪
VFO
q
Select the desired memory channel to be copied.
➥
Push [MR•SKIP] to select memory mode, then rotate
[DIAL] to select the desired memory channel.
• “
!
” and memory channel number appear.
w
Push and hold [S.MW•MW] for 1 sec. to transfer the se-
lected memory channel contents to VFO mode.
• VFO mode is selected automatically.
D
Memory
➪
memory
q
Select the desired memory channel to be transferred.
➥
Push [MR•SKIP] to select memory mode, then rotate
[DIAL] to select the desired memory channel.
• “
!
” and memory channel number appear.
w
Push [S.MW•MW] momentarily.
• “
!
” and memory channel number blink.
e
Rotate [DIAL] to select the target memory channel.
• Scan edge channels, 0A/0B to 49A/49B can also be selected.
r
Push and hold [S.MW•MW] for 1 sec. to transfer the se-
lected memory channel contents to the target memory.
• The targeted memory and transferred contents are indicated.