New2001
25
10
SPECIFICATIONS AND OPTIONS
New2001
■
Using the HM-184UL
NOTE:
•
NEVER
immerse the connector in water. If the connector
becomes wet,
BE SURE
to dry it before attaching to the
transceiver.
• The microphone element is located at the top left of the
speaker microphone, as shown in the illustration above.
To maximize the readability of your transmitted audio,
hold the microphone approximately 5 to 10 cm (2 to 4
inches) from your mouth, and then speak at your normal
voice level.
Turn OFF the transceiver before
attaching or detaching the microphone
[PTT]
Speaker
Microphone
To attach:
Attach the connector of the speaker microphone to
the multi connector on the transceiver and tighten the
screw.
Screw
Coin
CAUTION:
Firmly attach to
the multi connector, but do not
overtighten. A loose connection
will allow water intrusion into
the connector. Over-tightening
the connection can damage the
transceiver.
Turn OFF
Alligator type clip
