![background image](http://html1.mh-extra.com/html/icom/ic-m604/ic-m604_service-manual_2037989004.webp)
¤
GENERAL
• Frequency coverage
: 156.025–157.425 MHz (TX)
156.050–163.275 MHz (RX)
• Mode
: 16K0G3E (FM) / 16K0G2B (DSC)
• Power supply voltage
: 13.8 V DC ±15 % (negative ground)
• Operating temperature range
: –20˚C to +60˚C; –4˚F to +140˚F
• Current drain (at 13.8 V DC)
: Transmit
at 25 W
5.5 A approx.
Receive
max. audio
1.5 A approx.
• Antenna impedance
: 50
Ω
(nominal)
• Dimensions (projections not included)
: 220(W)
×
110(H)
×
109.4(D) mm; 8
21
⁄
32
(W)
×
4
11
⁄
32
(H)
×
4
5
⁄
16
(D) in
• Weight
: 1400 g; 3.09 lb
¤
TRANSMITTER
• Output power (at 13.8 V DC)
: High 25
W
Low 1
W
• Modulation
: Variable reactance frequency modulation
• Maximum frequency deviation
: ±5.0 kHz
• Frequency stability
: ±0.3 kHz
• Spurious emissions
: Less than –70 dBc
• Adjacent channel power
: More than 70 dB
• Residual modulation
: More than 40 dB
• Audio harmonic distortion
: Less than 10% at 60% deviation
• Audio frequency response
: +1 dB to –3 dB of 6 dB/octave from 300 Hz to 3000 Hz
• Microphone impedance
: 2 k
Ω
¤
RECEIVER
• Receive system
: Double conversion superheterodyne system
• Intermediate frequencies
: 1st 21.7
MHz*
1
, 30.15 MHz*
2
2nd 450
kHz
• Sensitivity
: Less than –10 dBµ at 12 dB SINAD (for both regular and CH70)
• Squelch sensitivity
: Less than –10 dBµ at threshold
• Adjacent channel selectivity
: More than 80 dB
• Spurious response
: More than 80 dB
• Intermodulation rejection ratio
: More than 80 dB
• Hum and noise
: More than 40 dB
• Audio output power (at 13.8 V DC)
: 5.0 W typical at 10% distortion with a 4
Ω
load
• Audio frequency responce
: +1 dB to –3 dB of –6 dB octave from 300 Hz to 3000 Hz
*
1
Channel 70, *
2
Normal channels
Specifications are measured in accordance with TIA/EIA 603
All stated specifications are subject to change without notice or obligation.
SECTION 1
SPECIFICATIONS
fineline6