![background image](http://html.mh-extra.com/html/icom/ic-m59euro/ic-m59euro_instruction-manual_612850022.webp)
SET MODE
5
18
■
Entering SET mode
SET mode is used to customize operation of the transceiver
to suit your operating needs.
D
To enter SET mode:
➀
While pushing [16], turn power ON.
• Keep pushing [16] until the initial SET mode display appears.
• SET mode is selected.
➁
To exit SET mode, turn power OFF then ON again.
D
To select an item:
There are up to 5 items in SET mode (depending on options
installed) that may be adjusted to suit your operating needs.
➀
Select SET mode as above.
➁
Push [16] to select the desired item; then rotate the channel
selector to select the desired condition.
• See the following pages for details on each SET mode item.
■
SET mode items
The diagram above shows the default settings for each
SET mode item and the order of selection.
Beep tones
Normal/priority
scan
Scan timer
Scramble code
Each push of [16] selects a SET mode item in order.
Auto acknowledge
contents
When UX-120 is installed.
When UT-79 is installed.