![background image](http://html1.mh-extra.com/html/icom/ic-m502aw/ic-m502aw_instruction-manual_4302151071.webp)
65
13
HM-127 REMOTE-CONTROL MICROPHONE
■
Installation
The optional HM-127 can be connected to the transceiver di-
rectly, as well as via the supplied connection cable for longer
distance remote operation. The connector of the connection
cable can be installed into a cabinet, wall, etc., as a built-in
plug.
For longer distance remote operation, the optional extension
cable, OPC-999 (6 m; 20 ft/connecting between transceiver
and the connection cable), is available, and up to 2 OPC-999
can be added.
q
Insert the supplied cable into the external microphone jack
and tighten the cable nut as shown below.
w
To use the supplied cable as a wall socket, follow the
below steps.
e
Using the mounting base, carefully mark off the 2 spots
where the cable and screws will be fastened.
r
Drill holes at these marks.
t
Install the mounting base using the supplied screws as
shown below.
y
The completed installation should look like this.
Gasket
Cap
Mounting base
Nut
Screw holes
(approx. 2 (d) mm;
3
⁄
32
″
)
13