10
3
BASIC OPERATION
■
Call channel programming
Pushing [16 •
C
] for 1 sec. selects the call channel, channel
16 by default, however you can program your most often-
used channels in each channel group for quick recall.
➀
Push [16 •
C
] for 1 sec. to se-
lect the call channel of the se-
lected group.
• “CALL” and the call channel
number appear.
➁
Push [16 •
C
] for 3 sec. to
enter call channel write mode.
• Call channel and channel group
to be programmed flash.
➂
Push [UP] or [DN] to select
the desired channel.
➃
Push any switch to automati-
cally program the selected
channel.
• The transceiver returns to nor-
mal operation.
USA
CALL
USA
TAG
CALL
USA
CALL
USA
■
Display backlighting
The function display and switches can be backlit for better
visibility under low light conditions.
While pushing [H/L •
DIM
], push [UP] or [DN] to adjust the
backlighting.
• Backlighting can be set to 1 of 4 intensities or turned OFF.
CALL
USA
IC-M45EURO-2 02.3.12 4:17 PM Page 10 (1,1)
Summary of Contents for IC-M45EURO
Page 1: ......
Page 10: ...O CH from ected st ...
Page 20: ...51 mm 2 in 28 5 mm 1 8 in 86 5 mm 3 13 32 in 25 mm 1 in ...
Page 24: ...6 9 16 Kamihigashi Hirano ku Osaka 547 0002 Japan ...
