![background image](http://html.mh-extra.com/html/icom/ic-m422/ic-m422_service-manual_612798007.webp)
3 - 1
SECTION 3
DISASSEMBLY INSTRUCTIONS
•
REMOVING THE CASE
1
Unscrew 4 screws,
A
.
Note:
When replacing the screws, 0.6–0.8 (N.m)
of torque MUST be applied to ensure water resistance.
2
Slide the case in the direction of the arrow to separate
the front pannel.
•
REMOVING THE MAIN UNIT
1
Disconnect W2 from the J2 and J3.
2
Disconnect W4 and W5 from the J4 and J5.
3
Unsolder the antenna connector,
C
(2 points).
4
Unsolder bottom side
D
(6 points), as shown below.
5
Unscrew 2 screws,
E
, and 6 screws,
F
, and 2 clips
G
to remove the MAIN unit from the chassis.
3
Unscrew 4 screws,
B
.
Note:
When replacing the screws, 0.6–0.8 (N.m)
of torque MUST be applied to ensure water resistance.
4
Slide the case in the direction of the arrow to remove the
case.
Summary of Contents for IC-M422
