![background image](http://html.mh-extra.com/html/icom/ic-m3euro/ic-m3euro_instruction-manual_612783012.webp)
8
3
BASIC OPERATION
■
Call channel programming
The call channel switch is used to select a specified channel,
however, you can program your most often-used channels in
each channel group for quick recall.
q
Push [16 •
C
] for 1 sec. to select
the call channel of the selected
channel group.
• “CALL” and call channel number
appear.
w
Push [16 •
C
] again for 3 sec.
(until long beep changes to 2
short beeps) to enter call chan-
nel programming condition.
• Call channel number and channel
group to be programmed flash.
r
Push [
]/[
] to select the de-
sired channel.
t
Push [16 •
C
] to program the dis-
played channel as the call chan-
nel.
• The call channel number and chan-
nel group stop flashing.
NOTE:
For the UK and Italy versions, push [CH •
I/U
] for
1 sec. in advance to select the desired channel group
(INT, U.S.A.) to be programmed.
■
Automatic backlighting
This function is convenient for nighttime operation. The auto-
matic backlighting can be activated in SET mode. (p. 12)
Push any key except for [PTT] to turn the backlighting ON.
• The backlighting is automatically turned OFF after 5 sec. of in-
activity.
CALL
TAG
CALL
TAG
CALL
TAG
CALL
TAG
INT
INT
CALL
INT
CALL
INT
IC-M3EURO-(2) 02.3.11 5:09 PM Page 8 (1,1)