![background image](http://html.mh-extra.com/html/icom/ic-m1euro-v/ic-m1euro-v_instruction-manual_612735020.webp)
SET mode is used to change the condi-
tion of 10 of the transceiver’s functions:
beep tone function, weather alert func-
tion, scan type
(normal/priority)
, scan re-
sume timer, auto scan function, auto-
matic backlighting, power save function,
self check function, voice scrambler
type and scrambling code.
When no optional voice scrambler unit
is installed, voice scrambler type and
scrambling code cannot be set.
(will not
be displayed)
q
Turn power OFF.
w
While pushing [MONI], turn power
ON and continue pushing [MONI]
until a beep is emitted.
• After beep emission, release [MONI].
• Set mode item at comment indicator and
condition at channel number readout are
displayed.
r
Push [MONI] to select the desired
item, if necessary.
t
Push [
Y
]/[
Z
] to select the desired
condition of the item.
y
To exit SET mode, push [16].
• Turning power OFF, then ON again also
exits SET mode.
■
SET mode items
D
D
Beep tone
“BEEP”
You can select silent operation by turn-
ing the beep tones OFF, or you can
have confirmation beeps sound at the
push of a switch, by turning the beep
tones ON. The beep tone volume is
linked with [VOL].
8
SET MODE
16
Automatic
backlighting
Power save
Scan resume timer
Scan type
Beep tone
Scrambler
unit selection
Scrambling
code
Self check function
Auto scan
Push
• SET mode construction
Push
Beep ON
(default)
Beep OFF
Push
■
SET mode programming
IC-M1EURO V_3.qxd 03.5.9 17:00 Page 16 (1,1)