10
2
PANEL DESCRIPTION
TX CODE CHANNEL SELECT KEY
“
TXC
”
Push to enter the TX code channel selection mode. Then set
the desired channel using [CH Up]/[CH Down]. (pgs. 14, 15)
TX CODE CHANNEL UP/DOWN KEYS
“
TXCU
” “
TXCD
”
Push to select a TX code channel directly.
ID-MEMORY SELECT KEY
“
IDMS
”
➥
Recalls detected ID codes.
• Push this key, then select the ID code using [CH Up]/[CH
Down].
• Up to 5 ID’s are memorized.
➥
Push and hold for 1 sec. to erase the selected ID’s.
SCRAMBLER/ENCRYPTION KEY
“
SCR
”
➥
While in the analog mode operation, push to toggle the
voice scrambler function ON and OFF.
➥
While in the digital mode operation, push to toggle the
encryption transmission function ON and OFF.
COMPANDER KEY
“
COMP
”
Push to toggle the compander function ON and OFF.
The compander function reduces noise components from the
transmitting audio to provide clear communication.
USER SET MODE KEY
“
SET
”
➥
Push and hold for 1 sec. to enter user set mode.
• During user set mode, push this key to select an item, and
change the value or condition using push [CH Up]/[CH Down].
➥
Push and hold this key for 1 sec. again to exit user set
mode.
User set mode is also available via the ‘Power ON function.’
Refer to (p. 16) also.
OPT OUT KEYS
“
OP1
” “
OP2
” “
OP3
”
Push to control the output signal level from the optional unit
connector.
OPT MOMENTARY KEYS
“
O1M
” “
O2M
” “
O3M
”
Push to control the output signal level from the optional unit
connector.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
