29
8
DTMF MEMORY
■
Confirming a DTMF memory
The DTMF tones in a memory channel can be confirmed.
q
Push
[FUNC](
M
), and then [DTMF.M](0) to enter the DTMF
memory mode.
w
Push
[
] or [
] to select a DTMF memory channel.
e
Push
[MONI] to confirm the DTMF memory contents.
• The programmed DTMF code sequence sounds.
• After sounding, the transceiver exits the DTMF memory mode.
■
Setting DTMF transfer speed
When slow DTMF transmission speeds are required, the
transceiver’s DTMF transmission speed can be adjusted in
the Initial Set mode.
q
While holding down
[
] and [
], turn ON the power to
enter the Initial Set mode.
w
Push
[
] or [
] to select the DTMF speed item. (dtd)
e
Rotate
[VOL] to select a speed.
• dtd. 1 : 100 milliseconds interval; 5.0 cps
• dtd. 2 : 200 milliseconds interval; 2.5 cps
• dtd. 3 : 300 milliseconds interval; 1.6 cps
• dtd. 5 : 500 milliseconds interval; 1.0 cps
(cps=characters per second)
r
Push
[# ENT](MN.W) to exit the Initial Set mode.
Exits the DTMF memory mode.
The programmed DTMF code
sequence sounds.