4-1-2
Display Assign
22
OFF
Beep emission (or non emission) is
retained even when the opening text is
displayed on the LCD.
Short
1 high beep "Pi" is emitted once.
Long
A long beep sound is emitted during
the time the opening text is displayed
on the LCD.
MR CH
The display indicates the selected
memory channel’s programmed
text. When no text is programmed,
indicates the memory channel
number.
Label
The display indicates the
programmed label in
Label
as
above. When no label is
programmed, indicates the
selected operating channel
number or programmed text.
MR CH +
Label
The display indicates the
programmed label in
Label
as
above and the programmed text.
When no label is programmed,
indicates the selected operating
channel number or programmed
text.
Display
•
Opening Text
Enter up to a 12-character repeater opening message
to appear on the LCD for 2 sec. when turning the
repeater ON.
Set this item as blank for no indication when turning
the repeater ON.
•
Opening Beep
(Available only when
Opening Text
is programmed as above)
Set the opening beep function to emit a beep when
the opening text is displayed on the LCD.
•
Label
Enter the desired up to a 12-character Label.
When "Label" or "MR CH + Label" is selected in
Display Mode
, the programmed label will be
indicated on the LCD.
•
Display Mode
Select the display indication from MR CH, Label, or
MR CH + Label.
Text setting for Opening Text and Label
Right click to display the [Edit... Enter] menu and click
[Edit... Enter].
- Double click the desired character in the table or
push [Space] to pick up the character.
- Push [Enter] to finish editing.
Usable characters are listed below.
- You can use and make an original character that is
edited in the
Character Editor
Screen.
