![background image](http://html.mh-extra.com/html/icom/ic-f9511/ic-f9511_instruction-manual_612683009.webp)
4
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
n
Programmable function keys
The following functions can be assigned to
[DIAL]*
,
[UP]
,
[DOWN]
,
[P0]
,
[P1]
,
[P2]
,
[P3]
and
[P4]
programmable func-
tion keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the
function depends on the programming.
* The functions you can assign to [DIAL] are limited.
(Only functions marked with
✩
can be assigned.)
✩
CH UP AND DOWN KEYS
➥
Push (or Rotate)* to select an operating channel.
➥
Push (or Rotate)* to select a scan group after pushing
and holding [Scan A Start/Stop]/[Scan B Start/Stop].
* Rotate when this function is assigned to [DIAL].
✩
ZONE UP AND DOWN KEY
(This function is for [DIAL] only)
Rotate to select the desired zone.
ZONE KEY
Push this key, then push [CH Up] or [CH Down] or rotate [CH
Up/Down]* to select the desired zone.
What is “zone”?
—The desired channels are assigned
into a zone according to the intended use for grouping.
For example, ‘Staff A’ and ‘Staff B’ are assigned into a
“Business” zone, and ‘John’ and ‘Cindy’ are assigned into
a “Private” zone.
SCAN A START/STOP KEY
➥
Push to start and cancel scanning operation.
• When Power ON Scan function is activated, push to pause the
scanning operation. And the paused scan resumes after the
specified time period has passed.
➥
Push and hold this key for 1 sec. to indicate the scan list,
then push [CH Up] or [CH Down] or rotate [CH Up/Down]*
to select the desired list. (Available depending on the pre-
setting.)
SCAN B START/STOP KEY
➥
Push to start and cancel scanning operation.
The scan restarts after the specified time period has
passed when the scan (started with this key) is cancelled
by except for this key operation.
➥
Push and hold this key for 1 sec. to indicate the scan list,
then push [CH Up] or [CH Down] or rotate [CH Up/Down]*
to select the desired list.
*IC-F9511S only