![background image](http://html2.mh-extra.com/html/icom/ic-f8101/ic-f8101_service-manual_4291828030.webp)
5-11
ADJUSTMENT
TRANSCEIVER’S
CONDITION
OPERATION
ADJUSTMENT
ITEM
VALUE
TX POWER
(CW mode)
1 • Channel: 26
• Mode:
CW
• Receiving
• Test equipment
Connect the test equipment to
the antenna connector.
(Confi g Menu)*
"RF Power"
"LOW"
2 • Transmitting
Simple 22/30
(Factory Menu
>Simple)
"TX Low Power"
10 W
3 • Receiving
(Confi g Menu)*
"RF Power"
"MID"
4 • Transmitting
Simple 23/30
(Factory Menu)
"TX Middle Power"
50 W
5 • Receiving
(Confi g Menu)*
"RF Power"
"HIGH"
6 • Transmitting
Simple 24/30
(Factory Menu)
"TX High Power"
120 W
‡
100 W
‡‡
TX POWER
(AM mode)
1 • Channel: 27
• Mode:
AM
• Receiving
• Test equipment
Connect the test equipment to
the antenna connector.
(Confi g Menu)*
"RF Power"
"HIGH"
2 • Transmitting
(Factory Menu>
Detail>Detail-41/64)
"AM Power Ratio"
30 W
TX POWER
(DATA)
1 • Channel: 28
• Mode:
RTTY
• Receiving
• Test equipment
Connect the test equipment to
the antenna connector.
(Confi g Menu)*
"RF Power"
"HIGH"
2 • Transmitting
(Factory Menu>
Detail>Detail-42/64)
"DATA Power Ratio"
75 W
PO METER
1 • Receiving
–
(Factory Menu>
Design>
Design-73/131)
"Power Meter H"
155
‡
140
‡‡
LOW
VOLTAGE
APC
1 • Receiving
–
(Factory Menu>
Design>
Design-80/131)
“Pocv H”
158
‡
150
‡‡
2 • Receiving
(Factory Menu>
Design>
Design-81/131)
“Pocv L”
65
‡
90
‡‡
POWER
OFF V
1 • Receiving
–
(Factory Menu>
Design>
Design-82/131)
“Power OFF V”
125
‡‡
TX
SENSITIVITY
1 • Channel: 29
• Receiving
• Test equipment
1) Connect the test equipment
to the antenna connector and
[MIC].
2) Set the test equipment’s au-
dio generator as:
Frequency: 1 kHz
Level:
2 mV
(Confi g Menu)*
"RF Power H"
"HIGH"
2 • Mode:
USB
• Transmitting
(MAIN-A UNIT)
R1535
70 W
5-3 TRANSMIT ADJUSTMENTS (Continued)
‡
: For 125 W versions.
‡‡
: For 100 W versions.
• ADJUSTMENT POINT ON THE
MAIN-A UNIT
TX IF SENSITIVITY ADJUSTMENT POINT (R1535)
*; Enter the Confi g Menu as shown below.
1) Push
[ ]
to return to the Main Menu.
2) Select “Setmode” and push
[
]
to enter, and then select “Confi g” using
[
]
/
[
]
.
3) Select “RF Power,” and then set the TX power.
4) Return to the Factory Menu to continue the adjustment.