Icom IC-F620, Instruction Manual

Page: 4 / 16

1
1
PANEL DESCRIPTION
■
Front panel
q
AF VOLUME CONTROL KNOB
Rotate the knob to adjust the audio output level.
• Minimum audio level is pre-programmed.
w
LEFT UP/DOWN [
∫ ∫
] / [
√ √
] KEYS
Push to select the talk group on the LTR or PassPort sys-
tem.
e
FUNCTION DISPLAY
Displays a variety of information, such as an operating
channel text, talk group text.
NOTE: The above functions depend on pre-programming.
r
RIGHT UP/DOWN [ ] / [ ] KEYS
➥
Push to select the operating system.
➥
Push [ ] key to send the most recently transmitted
DTMF code number during transmitting.
t
DEALER-PROGRAMMABLE KEYS [P0] to [P4]
Desired functions can be programmed independently by
your dealer.
y
POWER SWITCH [POWER]
Push to turn the power ON and OFF.
• At power ON, a power-up alert tone sounds for about 1 sec. and
an opening message may appear. And the transceiver automati-
cally starts scanning if the scan function had been activated
before the power was turned OFF.
u
MICROPHONE CONNECTOR
Connect the supplied microphone or optional DTMF micro-
phone.
NEVER connect non-specified microphones. The pin
assignments may be different and the transceiver may
be damaged.
D D
MICROPHONE
The supplied microphone has a PTT switch and a hanger
hook.
q r e w
u y t
IC-F610_F620_F621-2.qxd 04.3.17 3:51 PM Page 1 (1,1)