![background image](http://html1.mh-extra.com/html/icom/ic-f61v/ic-f61v_instruction-manual_4285927012.webp)
8
2
PANEL DESCRIPTION
■
Programmable function keys
The following functions can be assigned to
[P0]
,
[P1]
,
[P2]
,
[P3]
,
[Red]
,
[
]
and
[
]
programmable function keys.
Consult your Icom dealer or system operator for details concerning
your transceivers programming.
If the programmable function names are bracketed in the following
explanations, the specific key is used to activate the function de-
pends on programming.
CH UP AND DOWN KEYS
➥
Push to select an operating channel.
➥
Push to select a transmit code channel after pushing [TX Code
CH Select].
➥
Push to select a DTMF channel after pushing [DTMF Autodial].
➥
Push to select a scan group after pushing and holding [Scan A
Start/Stop]/[Scan B Start/Stop].
ZONE SELECT KEY
Push this key, then select the desired zone using [CH Up]/[CH
Down].
What is a “zone”?
—The desired channels are assigned into a
zone according to the intended use for grouping. For example,
‘Staff A’ and ‘Staff B’ are assigned into a “Business” zone, and
‘John’ and ‘Cindy’ are assigned into a “Private” zone.
SCAN A START/STOP KEY
➥
This key’s operation depends on the Power ON Scan setting.
When the power ON scan function is turned OFF;
Push to start and cancel scanning operation.
When the power ON scan function is turned ON;
Push to pause scanning, then resumes scanning after a speci-
fied time period has passed.
➥
Push and hold this key for 1 sec. to indicate the scan group, then
select the desired scan group using [CH Up]/[CH Down].
! IC-F51V_F61V_0.qxd 07.10.11 1:20 PM Page 8 (1,1)