Icom IC-F61-L Instruction Manual Download Page 2

Page: 2 / 64

FOREWORD

READ ALL INSTRUCTIONS

carefully and completely before

using the transceiver.

SAVE THIS INSTRUCTION MANUAL—

This instruction

manual contains important operating instructions for the IC-F61-L

uhf

transceiver

This instruction manual includes some functions which are

usable only when they are pre-programmed by your dealer. Ask
your dealer for details.

OPERATING NOTES

• When transmitting with a portable radio, hold the radio in a ver-

tical position with its microphone 5 to 10 centimeters away from
your mouth. Keep the antenna at least 2.5 centimeters from your
head and body.

• If you wear a portable two-way radio on your body, ensure that

the antenna is at least 2.5 centimeters from your body when
transmitting.

Icom, Icom Inc. and Icom logo are registered trademarks of Icom Incorporated

(Japan) in Japan, the United States, United Kingdom, Germany, France, Spain,

Russia and/or other countries.

Summary of Contents for IC-F61-L

































































Search results

Summary of Contents for IC-F61-L

Reviews:

Related manuals for IC-F61-L

Brands by name

Popular brands

Icom IC-F61-L, Instruction Manual

Search results

Summary of Contents for IC-F61-L

Reviews:

Related manuals for IC-F61-L

Brands by name

Popular brands