Page 4/4
Connection Cable:
Select the proper configuration below depending on if your radio will be connected as Radio A or Radio B to the X-Link interface.
Icom IC-F5400-series A
www.lse.se
REE
Page 1: ...ower Supply 12VDC max 0 3A Connection The radio is connected both through the 25Pin connector and through the external speaker connector See wiring diagram on the following page Radio setup Check the settings as described on the next page Icom IC F5400 series A www lse se REE ...
Page 2: ...ng below will inhibit that some one accidently changes the setting on the front panel Set both the Min and Max Audio Level to 15 This will force the external audio to have a fixed volume level that is accepted by the X Link Interface Busy Set the Ext I O 17 to Busy active Low PTT Set the Ext I O 19 to EPTT active Low Icom IC F5400 series A www lse se REE ...
Page 3: ...h squelch output for Rx detect Part of the Configuration software window Check adjust the audio levels in both directions in the interface so that the users hears the X Link with the same level as when listening to other radios See the X Link setup manual for details on setting the audio level Icom IC F5400 series A www lse se REE ...
Page 4: ...Page 4 4 Connection Cable Select the proper configuration below depending on if your radio will be connected as Radio A or Radio B to the X Link interface Icom IC F5400 series A www lse se REE ...
