– 1 –
ACCESSORIES GUIDE
VHF/UHF DIGITAL TRANSCEIVERS
Iç-F52D
Thank you for choosing this Icom product.
READ
ALL INSTRUCTIONS
carefully and completely
before using this product.
This guide describes about the IC-F52D/IC-F62D’s
accessories and option details.
Supplied accessories
Iç-F62D
Battery pack
Belt clip
Connector cover
(with a screw)
NOTE:
• Some accessories are not supplied, or the shape
is different, depending on the transceiver version.
•
Confirmbothbatteryslidinglocksarelocked
in place, when attaching the battery to the
transceiver. Both sliding locks make a ‘click’ sound
when locked.
Attaching accessories
D
Flexible antenna
Connecttherequiredflexibleantennatotheantenna
connector.
CAUTION:
•
DO NOT
carry the transceiver by holding only the
antenna.
•
DO NOT
connect an antenna other than those
listed in the INSTRUCTIONS.
•Transmitting without an antenna may damage the
transceiver.
D
Battery pack
CAUTION: DO NOT
attach or detach the battery
pack when the transceiver is wet or soiled. This may
result in water or dust getting into the transceiver/
battery pack and may damage the transceiver.
To attach:
1. Slide the battery pack in the direction of the
arrow. (
q
)
2. Push the battery pack until the battery sliding
locks make a ‘click’ sound. (
w
)
To detach:
1. Push both battery sliding locks in the direction of
the arrow. (
z
)
•The battery pack is then released.
2. Lift up to detach the battery pack. (
x
)
NOTE:
Keep the battery pack terminals clean. It’s a
good idea to occasionally clean them.
Battery sliding locks
Battery pack
q
q
w
x
z
z
