background image

ii

PRECAUTIONS

R

 WARNING! NEVER

 operate the transceiver during 

a lightning storm. It may result in an electric shock, cause a 
fire or damage the transceiver. Always disconnect the power 
source and antenna before a storm.

R

 WARNING! NEVER

 connect the transceiver to an 

AC outlet. This may pose a fire hazard or result in an electric 
shock.

R

 WARNING! NEVER

 connect the transceiver to a 

power source of more than 16 V DC or use reverse polarity. 
This could cause a fire or damage the transceiver.

R

 WARNING! NEVER

 cut the DC power cable be-

tween the DC plug and fuse holder. If an incorrect connection 
is made after cutting, the transceiver might be damaged.

R

 WARNING! NEVER

 place the transceiver where 

normal operation of the vehicle may be hindered or where it 
could cause bodily injury.

CAUTION:

 

NEVER

 allow children to touch the trans-

ceiver.

CAUTION:

 

NEVER

 expose the transceiver to rain, 

snow or any liquids.

DO NOT

 operate or place the transceiver in areas with 

temperatures below –30°C (–22°F) or above +60°C (+140°F), 
or in areas subject to direct sunlight, such as the dashboard.

DO NOT

 operate the transceiver without running the ve-

hicle’s engine. The vehicle’s battery will quickly run out when 
the transceiver transmits while the vehicle’s engine is OFF.

DO NOT

 place the transceiver in excessively dusty envi-

ronments.

DO NOT

 place the transceiver against walls. This will ob-

struct heat dissipation.

DO NOT

 use harsh solvents such as benzine or alcohol 

when cleaning, as they will damage the transceiver surfaces.

BE CAREFUL!

 The transceiver will become hot when 

operating continuously for long periods of time.

USE

 the specified or optional microphone only. Other mi-

crophones have different pin assignments and may damage 
the transceiver.

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom 
Incorporated (Japan) in Japan, the United States, the United King-
dom, Germany, France, Spain, Russia, Australia, New Zealand, and/
or other countries.
All other products or brands are registered trademarks or trademarks 
of their respective holders.

Summary of Contents for IC-F5220D









Reviews: