ii
PRECAUTIONS
R
WARNING! NEVER
connect the transceiver to an
AC outlet. This may pose a fire hazard or result in an electric
shock.
R
WARNING! NEVER
connect the transceiver to a
power source of more than 16 V DC or use reverse polarity.
This could cause a fire or damage the transceiver.
R
WARNING! NEVER
cut the DC power cable be-
tween the DC plug and fuse holder. If an incorrect connection
is made after cutting, the transceiver might be damaged.
R
WARNING! NEVER
place the transceiver where
normal operation of the vehicle may be hindered or where it
could cause bodily injury.
CAUTION:
NEVER
allow children to touch the trans-
ceiver.
CAUTION:
NEVER
expose the transceiver to rain,
snow or any liquids.
USE
the specified microphone only. Other microphones
have different pin assignments and may damage the trans-
ceiver.
DO NOT
use or place the transceiver in areas with tem-
peratures below –30°C (–22°F) or above +60°C (+140°F), or
in areas subject to direct sunlight, such as the dashboard.
DO NOT
operate the transceiver without running the ve-
hicle’s engine. The vehicle’s battery will quickly run out when
the transceiver transmits while the vehicle’s engine is OFF.
DO NOT
place the transceiver in excessively dusty envi-
ronments.
DO NOT
place the transceiver against walls. This will ob-
struct heat dissipation.
DO NOT
use harsh solvents such as benzine or alcohol
when cleaning, as they will damage the transceiver surfaces.
BE CAREFUL!
The transceiver will become hot when
operating continuously for long periods of time.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom
Incorporated (Japan) in Japan, the United States, the United King-
dom, Germany, France, Spain, Russia and/or other countries.
All other products or brands are registered trademarks or trademarks
of their respective holders.
