6
2
OPERATION
■
Transmitting a call
A total of 3 ways for code selection are available— selecting the
call code from memory, entering the call code from the keypad and
calling back from the queue channel record.
D
D
Using call memory
q
While in the standby condition, push [P1] (Digital) to enter the
call code memory channel selection mode.
w
Push [
]/[
] to select the desired call code.
e
Push [P0] (Call) or [PTT]* to call.
*PTT call can be made only when PTT call capability is permitted.
NOTE:
When no answer back is received, the transceiver re-
peats the call 3 times (default) automatically, and “WAIT” is
displayed during each call. However, an error beep sounds
and “FAILED” is displayed when no answer back is received
after the calls.
r
Push [PTT] to transmit; release to receive.
t
Push [P3] (Moni(Audi)) to send the ‘Clear down’ signal.
Call code memory is displayed.
! OG_BIIS_IC-F50V_0.qxd 07.8.8 6:19 PM Page 6 (1,1)
