![background image](http://html2.mh-extra.com/html/icom/ic-f50v/ic-f50v_instruction-manual_3745132024.webp)
17
3
BASIC OPERATION
D
TX code channel selection
If the transceiver has [TX Code CH Select] assigned to it, the in-
dication can be toggled between the operating channel number
(or name) and TX code channel number (or name). When the
TX code channel number (or name) is displayed, [CH Up] or [CH
Down] selects the TX code channel.
USING [TX CODE CH SELECT] KEY:
q
Push [TX Code CH Select]— a TX code channel number (or
name) appears.
w
Push [CH Up] or [CH Down] to select the desired TX code
channel.
e
After selecting, push [TX Code CH Select] to set.
• Return to the stand-by mode.
r
Push [Call] to transmit the selected TX code.
USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY:
If the transceiver has a [TX Code CH Up] or [TX Code CH Down]
key assignment, the programmed TX code channel can be se-
lected directly when pushed.
D
TX code number edit
(PMR operation only)
If the transceiver has [TX Code CH Select] or [TX Code Enter] as-
signed to it, TX code contents can be edited within the allowable
digits.
USING [TX CODE CH SELECT] KEY:
q
Push [TX Code CH Select] to enter the TX code channel selec-
tion mode.
• Select the desired operating channel before entering the TX code
channel selection mode if necessary.
w
Push [TX Code CH Select] for 1 sec. to enter the TX code edit
mode.
• The digit to be edited blinks.