![background image](http://html2.mh-extra.com/html/icom/ic-f5060-series/ic-f5060-series_instruction-manual_3715080011.webp)
6
1
PANEL DESCRIPTION
1
WIDE/NARROW KEY
Push to toggle the IF bandwidth between wide and narrow.
(Analog or mixed mode operation only)
• The wide passband width can be selected from 25.0 or 20.0 kHz
using the CS-F5060
cloning
software
. (PMR operation only) Ask
your dealer for details.
DTMF AUTODIAL KEY
Push to enter the DTMF channel selection mode. Then select
the desired DTMF channel using [CH Up]/[CH Down].
After selecting the DTMF channel, push again to transmit
the selected DTMF code.
RE-DIAL KEY
Push to transmit the last-transmitted DTMF code.
• TX memories are cleared after turning the transceiver OFF.
CALL KEYS
Push to transmit a 2/5-Tone/BIIS ID code.
• Call transmission is necessary before calling another station
depending on your signalling system.
• [Call A] and/or [Call B] may be available when your system
employs selective ‘Individual/Group’ calls. Ask your dealer which
call is assigned to each key.
EMERGENCY KEY
Hold down to transmit the emergency call.
• The emergency call transmits with beeps; the display does not
change.
• The transceiver can transmit the emergency call silently or with the
display changes depending on the pre-setting. Ask your dealer for
details.
• If you want to cancel the emergency call, hold down the key again
before transmitting the call.
• The emergency call is transmitted one time only or repeatedly until
receiving a control code, depending on the pre-setting.
SURVEILLANCE KEY
Push to turn the surveillance function ON or OFF.
When this function is turned ON, the beep is not emitted and
the LCD backlight and the LED indicator do not light when a
signal is received or a key is pushed.
TX CODE ENTER KEY
(PMR operation only)
Push to enter the ID code edit mode directly, for both
5-Tone and MSK. Then set the desired digit using [CH Up]/
[CH Down]. (p. 11)
TX CODE CHANNEL SELECT KEY
➥
Push to enter the ID code channel selection mode
directly. Then set the desired channel using [CH Up]/
[CH Down]. (p. 10)
➥
During ID code channel selection mode, hold down for
1 second to enter the ID code edit mode for 5-Tone and
MSK. Then set the desired digit using [CH Up]/[CH Down].
(p. 11)