1 - 1
SECTION 1
SPECIFICATIONS
‘
‘
GENERAL
• Frequency coverage
: 440.000–470.000 MHz
• Type of emission
: 8K50F3E
• Number of channels
: 32 ch (16 channels
×
2 banks: 2-BANK version), 16 ch (16 channel version)
• Power supply requirement
: 7.2 V DC (negative ground; supplied battery pack)
• Current drain (approx.)
: Transmit
at High (4.0 W)
1.55 A
at Low (1.0 W)
800 mA
Receive
rated audio
250 mA
stand-by
70 mA
• Frequency stability
: ±0.00025 %
• Usable temperature range
: –30˚C to +60˚C; –22˚F to +140˚F
• Dimensions (projections not included)
: 54(W)
×
132(H)
×
35(D) mm; 2
5
⁄
32
(W)
×
5
3
⁄
16
(H)
×
1
3
⁄
8
(D) in.
• Weight (with ant., BP-209)
: 355 g; 12.5 oz.
‘
‘
TRANSMITTER
• RF output power (at 7.2 V DC)
: 4 W / 1 W (High / Low)
(with supplied battery pack)
• Modulation system
: Variable reactance frequency modulation
• Maximum frequency deviation
: ±2.5 kHz
• Spurious emissions
: 73 dBc (typical)
• Adjacent channel power
: 60 dB (typical)
• Transmitter audio distortion
: Less than 3% at 1 kHz, 40% deviation
• Limitting charact of modulator
: 70–100% of max. deviation
• Ext. microphone connector
: 3-conductor 2.5(d) mm (
1
⁄
10
”)/2.2 k
Ω
‘
‘
RECEIVER
• Receive system
: Double conversion superheterodyne system
• Intermediate frequencies
: 1st
46.35 MHz
2nd
450 kHz
• Sensitivity
: 0.3 µV at 12 dB SINAD (typical)
• Squelch sensitivity
: 0.3 µV at threshold (typical)
• Adjacent channel selectivity
: 65 dB (typical)
• Spurious response rejection
: 70 dB (typical)
• Intermodulation rejection ratio
: 70 dB (typical)
• Hum and noise
: 40 dB (typical)
• Audio output power (at 7.2 V DC)
: 500 mW typical at 5% distortion with an 8
Ω
load
• Ext. speaker connector
: 3-conductor 3.5(d) mm (
1
⁄
8
”)/8
Ω
Specifications are measured in accordance with EIA/TIA-603.
All stated specifications are subject to change without notice or obligation.
