5
2
PANEL DESCRIPTION
N
Programmable function keys
The following functions can be assigned to
[P0]
,
[P1]
,
[P2]
,
[P3]
,
[Emergency]
,
[Monitor]
,
[
M
]
* and
[#]
* programmable
function keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the
following explanations, the specific key used to activate the
function depends on programming.
*Available on 10-keypad version only.
SEND DTMF KEY
Push to enter the DTMF encode channel selection mode.
SELECT CALL KEY
±
Push to turn the DTMF select call mute function ON.
±
Push and hold to turn the DTMF select call mute function
OFF.
PRIORITY KEY
Push to select the priority channel.
EMERGENCY KEY
Push to select the priority channel and automatically trans-
mit a DTMF emergency call code.
SCAN A KEY
±
4HIS KEYS OPERATION DEPENDS ON THE 0OWER /. 3CAN SET
-
ting.
When the power ON scan function is turned OFF;
Push to start and cancel scanning operation. In case of
transmission during scan, cancels scanning.
When the power ON scan function is turned ON;
Push to pause scanning. Scanning resumes after pass-
ing a specified time period. In case of transmission during
scan, pauses scanning. Scanning resumes after passing
a specified time period specified.
±
Push and hold this key for 1 sec. to indicate the scan
group, then push to select the desired group.
SCAN B KEY
±
Push to start and cancel scanning operation. In case of
transmission during scan, pauses scanning. Scanning
resumes after passing a specified time period.
±
Push and hold this key for 1 sec. to indicate the scan
group, then push to select the desired group.
PRIORITY CHANNEL KEYS
±
Push to select Priority A or Priority B channel.
±
Push and hold
[Prio A (Rewrite)]
to rewrite the Prio A
channel.
