Icom IC-F4029SDR, Instruction Manual

Page: 16 / 48

13
4
SCAN OPERATION
■
Starting a scan
To speed up the scanning interval, set the desired channels
as ‘Select channels’ and set Select channel mode in advance.
(pgs. 10, 11)
q
Push [Scan A] or [Scan B] to start scanning.
w
When a signal is received, scan pauses and resumes
according to the included CTCSS frequency or DTCS
code. (pgs. 16, 17)
• When the code is matched, scan resumes 3 sec. after the signal
disappears.
• When the code is not matched, scan resumes immediately.
e
Push [Scan A] or [Scan B] to stop scanning.
Blinks Appears
Blinks
When a signal is received.
Starting Scan 1 .
! IC-F4029SDR-3.qxd 06.7.4 5:53 PM Page 13 (1,1)