![background image](http://html1.mh-extra.com/html/icom/ic-f3gt/ic-f3gt_instruction-manual_4271550019.webp)
14
4
PROGRAMMABLE FUNCTIONS
D
DTMF TRANSMISSION
This function allows you to send a pre-programmed DTMF code to
control a repeater, open another transceiver’s squelch, etc.
Manual transmission:
Push desired digit keys in sequence while pushing [PTT].
• Pushing [PTT] may not be necessary depending on programming.
Automatic pre-programmed transmission:
q
Push the [DTMF] switch to select DTMF autodial mode, then
push [
Y
] or [
Z
] to select the desired channel.
w
Push the [DTMF] switch once more to send a DTMF code.
D
DTMF RE-DIAL FUNCTION
This function allows you to transmit the last-used DTMF code at
the push of a key.
Push the [DTMF RE-DIAL] switch momentarily to activate the func-
tion.
• The previously transmitted DTMF code is automatically transmitted.
• If no code has been transmitted since turning the power ON, this func-
tion does not activate.
D
EMERGENCY FUNCTION
The emergency function allows you to send your ID quickly and
easily to your Base Station, etc. in case of emergency.
Push and hold the [EMERGENCY] switch for 1 sec. to activate the
emergency function.
• The transceiver selects a pre-programmed channel, then sends an
emergency signal to your Base Station.
• The pre-programmed channel remains selected until a control signal
is received from the Base Station, or power is turned OFF.
• The emergency call is repeatedly transmitted at pre-programmed in-
tervals.
Summary of Contents for IC-F3GT
Page 30: ...MEMO...
Page 31: ...MEMO...